Posted on October 18th, 2012
If you are new to photography you may be facing issues with blurry shots. You spent a good amount of money on a high tech camera but your photos still don’t look great as you want them to be. You may have tried a tripod and still you have problem. We are going to cover some causes you may have overlooked or not even familiar with.
Slow Shutter Speed
Avoid using a slow shutter speed, if the shutter speed is lower than 1/focal length you are going to have a blurry photo. I would suggest using a shutter of 1/60 or more if you are using a 50mm lens. The longer the focal length of the lens the faster the shutter speed should be.
Photographing in the right light quality can affect the sharpness of your photo. Photographing in flat lighting will cause your photograph to not look as sharp. It’s best to photograph in the right contrast with good light and darks that will keep outcome looking sharp.
If you are photographing an object that is moving than this will also cause your photos to be blurry no matter what the shutter speed. In this case it might be best to use a flash to freeze the object that you are photographing.
High ISO can also cause a photo to lack sharpness by causing noise. Most high end cameras will have little issue if any with noise. If you aren’t shooting with that high end camera you will notice loss of detail when using a high ISO. Try to use a low ISO when shooting to ensure sharpness.
It’s very important to keep your lens clean as well to avoid blurry photos. Check your lens for fingerprints, dirt, scratches, and mildew. These will show up as foggy areas on your photo. If you do have a scratch on your lens then the bad news is you will more than likely have to get it replaced.
We hope these few tips help you if you are having issues with blurry photos. Be sure and stop by http://www.42photo.com for all of your camera needs.